Trouble shooting : where to begin
FlexRadio Systems Forums
Home       Members    Calendar    Who's On
Welcome Guest ( Login | Register )

Trouble shooting : where to begin Expand / Collapse
Posted Saturday, December 2, 2006 11:34 AM
Forum Newbie

Forum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum Newbie

Group: Forum Members
Last Login: Saturday, March 10, 2012 2:57 PM
Posts: 7, Visits: 54

I've owned and used the SDR for about 9 months now. Last week, my amplifier stopped working. On investigating, I found that the relay was not being pulled to ground. The amp works fine with my Icom 746PRO, but not the SDR. The SDR works fine without the amplifier. I've already verified that the cable is still wired properly.

I just wanted to ask for any advice on where to start looking/trouble shooting, before I begin.

Thanks In Advance !!


Post #76
Posted Sunday, December 3, 2006 9:02 PM



Group: Administrators
Last Login: Friday, August 30, 2019 8:35 AM
Posts: 588, Visits: 1,478
Check the X2 configuration and make sure a setting has not changed in the Setup.


Tim - W4TME
Post #77
« Prev Topic | Next Topic »

Reading This Topic Expand / Collapse
Active Users: 1 (1 guest, 0 members, 0 anonymous members)
No members currently viewing this topic.

Permissions Expand / Collapse

All times are GMT -5:00, Time now is 8:35pm

Powered By InstantForum.NET v4.1.4 © 2020
Execution: 0.016. 8 queries. Compression Disabled.