FLEX-1500 - No audio from headphone jack
FlexRadio Systems Forums
Home       Members    Calendar    Who's On
Welcome Guest ( Login | Register )
        


FLEX-1500 - No audio from headphone jack Expand / Collapse
Author
Message
Posted Tuesday, October 23, 2012 10:07 AM
Forum Guru

Forum GuruForum GuruForum GuruForum GuruForum GuruForum GuruForum GuruForum Guru

Group: Forum Members
Last Login: Sunday, September 29, 2013 11:01 AM
Posts: 58, Visits: 64
I don't have any audio from the headphone jack on my FLEX-1500.

- Mixer Settings are OK (Output --> Phones --> checked & level to max. Mute All Outputs OFF)
- Using a stereo 1/8" jack/headphone... no audio
- Connected to computer audio in port... no audio

Audio is OK through the VAC/USB port

Is there a "pico fuse" or something inside the F-1500 that would mute the RX audio from the headphone jack?


Bruno, W4AFK
West Melbourne, Florida [EL98qb]

[FLEX-1500 w/Pixel RF PRO-1B HF Loop (RX) Antenna & MFJ-1786 & 1788 HF Loops (TX), HLA-150 Plus amp | TenTec RX-320D & Kenwood R-2000 w/Timewave DSP-599zx, sharing LF Engineering H-800 SkyMatch HF Probe Antenna, various software packages for data modes]
Post #6107
Posted Saturday, December 1, 2012 9:59 AM
Forum Newbie

Forum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum Newbie

Group: Forum Members
Last Login: Sunday, May 5, 2013 11:25 AM
Posts: 6, Visits: 15
Have you checked with earphones? Is MUT set on PSDR?
Post #6174
Posted Friday, February 22, 2013 5:30 AM
Forum Newbie

Forum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum Newbie

Group: Forum Members
Last Login: Tuesday, August 27, 2013 1:04 PM
Posts: 1, Visits: 8
Hi

I have same "no audio from headphone jack " here if PC has booted/crashed while Flex-1500 & PSDR is active.

Then closing PSDR and rebooting Flex-15000 brings the audio back.

This has happened me many times.

I use my flex-1500 remotely, with teamviewer, Skype.

I have not found any way to do this remotely, help on this would be nice
as my headphone jack goes silent, I still hear audio noise, witch chances then changing PSDR volume, so audio PA is there, just no RX audio...

I use Flex mostly to monitor PSK31, so direct audio would be preferred
VAC works yes, but best sensitivity I get with direct audio cable to computer.

Also would like to see PSDR volume to work also in VAC mode.

73
-Jouni OH1CO
Post #6411
« Prev Topic | Next Topic »

Reading This Topic Expand / Collapse
Active Users: 0 (0 guests, 0 members, 0 anonymous members)
No members currently viewing this topic.

Permissions Expand / Collapse

All times are GMT -5:00, Time now is 12:55pm

Powered By InstantForum.NET v4.1.4 © 2018
Execution: 0.047. 13 queries. Compression Disabled.